Optimising the design of electric bicycle drives
The Engineering Network Ltd
Posted to News on 31st Jul 2023, 15:28

Optimising the design of electric bicycle drives

Optimising the design of electric bicycle drives

Simon Ward, technical manager at TFC explains why e-bike manufacturers are turning to components manufactured by edgewinding to solve e-bike design challenges.

According to data from the Bicycle Association, 165,000 electric bikes were purchased in the UK in 2022, meaning the UK remains a less mature market than Germany, where two million are sold a year. However, representatives at the 2023 Cycle Show in London agree that the market is gaining momentum after a bumpy few years. Growing the e-bike market requires manufacturers to effectively design appealing products, manufacture them efficiently and scale up e-bike production profitably.

On the future of e-bikes in the UK, the Bicycle Association’s executive director Steve Garidis said: “It’s clear looking at the sales data – particularly comparing the UK with European countries like Germany and France – that we risk being left behind here. However, e-bikes clearly have huge potential, which could be unlocked here in the UK.”

With fuel prices remaining high, cycling has seen interest spike, with many turning to cycling as a cheaper alternative to driving. E-bikes are the most natural replacement for driving short distances. Cycling industry experts are calling for increased investment in infrastructure, but e-bike manufacturers have a role to play too, in manufacturing economic, lightweight and reliable e-bikes.

E-bike manufacturing trends

In e-bikes, springs and retaining rings can be used in drive technology, wheel hubs, braking systems as well as throughout the structural framework. Wave springs provide solutions to design and manufacturing problems by compensating for tolerances, and preloading bearings for optimal performance. Spirolox retaining rings provide 360° retention across multiple internal and external applications, whilst Hoopsters are particularly well suited to tubular frames due to the shallow groove requirements.

In recent years, design engineers have moved away from stamped springs and retaining rings, and towards ones made via edgewinding. This method involves coiling wire on edge to create springs or retaining rings to precise specifications. The process gives more flexibility to manufacturers in terms of bespoke sizing and allows wider material choices to be considered.

In addition, the circular grain metallurgy increases the strength and stability of the material — cold rolling causes metal grains to elongate and lock together, which improves mechanical properties. Since the grain follows the direction of the coil, it provides better mechanical properties than if it were to be stamped from sheet material where grain flow is in just one direction.

Wave springs in e-bike design

One example of a component made by edgewinding is a Crest to Crest wave spring, an alternative to the traditional coil spring. Crest to Crest Wave springs are flat-wire compression springs offering the same spring force as a traditional wire round spring, but at 50 per cent of the operating height.

Single turn wave springs are perfect for preloading bearings, while for applications with higher forces, designers may prefer nested wave springs composed of multiple layers nested together to provide a compact high force solution.

The potential for a 50 per cent saving in space benefits the work of design engineers working on electric drive designs for e-bikes, which must be compact so that they can easily be integrated into different bicycle frames. The space-saving opens up new design possibilities, in particular reducing material usage and making bikes lighter — a significant efficiency advantage.

Retaining rings

In e-bike drivetrain technology, retaining rings are used for securing bearings on shafts, as retaining elements in gear assemblies. Here too, designers are opting of flat-wire spirals due to their improved performance. Compared with traditional stamped circlips (DIN 471/472), they have no protruding lugs and, depending on the variant, no gap in the circumference.

Even in situations with limited radial space or where rotating components require minimal imbalance, flat wire retaining rings are the preferred choice of many e-bike designers.

The edgewinding process creates components with many technical benefits. From space saving to easy installation, wave springs and retaining rings can help UK e-bike manufacturers produce appealing products to support this growing industry.


TFC Ltd

Hale House
Ghyll Industrial Estate
TN21 8AW
UNITED KINGDOM

+44 (0)1435 866011

The Engineering Network Ltd Labfacility Limited
The Engineering Network Ltd